• Immersion bath that cleans and effortlessly removes dirt and oxidation from silver and silver-plated jewellery
• Restores shine in 10 seconds
• Provides anti-tarnish protection
• Handling basket included
• Contents: 170 ml
• Made in the Netherlands
Compatible with: solid silver jewellery, particularly sterling silver 925, or silver-plated jewellery.
Not recommended for: jewellery set with stones or pearls, glued or enamelled elements, gold, platinum, steel, stainless steel, other metals, or jewellery with a decorative patina or intentional blackening.
Our experts’ recommendations:
• Check the composition of the jewellery using the hallmark before immersing it.
• Examine the condition of the plating: do not use the bath if the silver layer is heavily worn or the underlying metal is visible.
• Observe the immersion time (5-10 seconds), then rinse and dry the jewellery immediately.
• Care for silver at the first signs of tarnishing, before oxidation becomes too extensive.
Benefits
• Fast professional action: removes oxidation in a few seconds and without effort.
• Immersion cleaning: easily treats difficult-to-reach areas. Wetting agents facilitate contact between the formula and the surfaces and help remove dirt.
• Non-abrasive formula: respects compatible surfaces without aggressive mechanical action.
• Residue-free finish: rinsing removes the solution after treatment. The formula’s extremely high solubility allows rapid rinsing with water.
• Easier handling: basket included for immersing and removing jewellery without coming into contact with the formula.
• Specialist use: immersion time designed for the needs of jewellery professionals.
• Regulatory compliance: Hagerty formulas are developed in accordance with the European regulations applicable to detergents, including REACH. Formula not tested on animals.
1. Place the jewellery in the basket.
2. Immerse the basket in the bath and move it gently.
3. Leave to work for no more than 5-10 seconds.
4. Remove the jewellery and rinse it thoroughly with clean water.
5. Dry immediately with a soft, lint-free cloth.
Avoid all contact with steel and stainless steel. In the event of accidental contact, rinse immediately.
We recommend wearing protective gloves.
Good to know
Silver Clean for Professional Use is intended for rapid care of silver jewellery at the counter or in the workshop. It is not intended for sale to the end consumer: use is reserved for professionals and the stated contact time must be observed.
FAQ
Q: Who is Silver Clean for Professional Use intended for?
A: It is reserved for professional use, particularly in jewellery shops, workshops or after-sales services.
Q: Which jewellery can it clean?
A: It is designed for silver and silver-plated jewellery that is compatible with immersion cleaning.
Q: How long should the jewellery be left in the bath?
A: The immersion time is 5-10 seconds maximum.
Q: Does the jewellery need to be rinsed?
A: Yes. After the bath, rinse it thoroughly with clean water, then dry it immediately with a soft cloth.
Q: Is the bath reusable?
A: Yes. Silver Clean for Professional Use can be reused for several months. Its useful life depends on the frequency of cleaning and the amount of dirt removed. For optimum effectiveness, use the bath within 12 months of opening.
Q: Why did the jewellery turn black after using Silver Clean for Professional Use?
A: Check its composition and hallmark. An incompatible metal, altered plating, an immersion time exceeding 10 seconds, or insufficient rinsing and drying can change its appearance. Rinse and dry the jewellery again. If the marks persist, do not repeat the bath and seek professional advice.
Q: What should I do if my jewellery does not fit in the basket?
A: Pour the solution into a clean container large enough to immerse the jewellery completely. Observe the stated immersion time, then rinse immediately and dry the piece thoroughly. Do not use a metal container; wear gloves and protect your work surface.
